CALL: 905.475.0220
GLF Ground Loop Filter
click
click to view larger
DATA SHEET Email a Friend Print This Page
InstaLink® GLF Ground Loop Filter Cat. #: 330002

It acts like a current loop isolator up to a point but doesn’t use a transformer or optocoupler for isolation! Maybe we could call it a “non-galvanic isolator” but we can’t think of any other type of isolation other than galvanic. Since it tolerates ground differential voltages up to 120V we even considered naming it “The Tolerator” but to avoid controversy we opted for “Ground Loop Filter” or “GLF” for short. This module interfaces a field transmitter producing 4-20mA to a PLC or DCS input. Where analog isolators can provide optical or transformer isolation up to 2KV or higher the InstaLink®-GLF provides a very high impedance between the input and output loops but does not actually isolate the signals.

This acts as a barrier for currents caused by ground differentials. The barrier is rated 120V - above 140V it can break down and a ground loop current would be produced. 120 volts represents a sizeable ground differential voltage and much lower values are typical.

A unique feature of the InstaLink®-GLF is the make-before-break connector that allows a meter to be inserted into the input loop and removed without causing a momentary interruption of the loop. This makes calibration very easy. A test cable is available. Other features include very fast response time and plug-in jumpers for easy distribution of 24Vdc (included with each module). Best of all, the low price allows you to install one in each of your current loops as insurance against errors caused by ground loops. If you are only concerned with ground loops the InstaLink®-GLF is the solution. If you are also trying to prevent overvoltage transients from reaching your PLC or DCS then the InstaLink®-CLI isolator might be a better solution.

To order this product, call 1-866-698-1134 or email sales@emphatec.com

Contact Us

Emphatec Inc
115 Anderson Avenue, Markham, ON L6E 1A4
Tel: 905.475.0220
Fax (for Engineering): 905.475.8796
Fax: (for Orders): 905.475.8117
Sales: sales@emphatec.com
Service: customerservice@emphatec.com

emphatec-salesbtn.gif emphatec-distbtn.gif

emphatec-productsbtn.jpgemphatec-applicationsbtn.jpg

Everyone at Emphatec wishes you a happy holiday season! We will be closed Dec 25th - Jan1st. See you in the new year!
As an effort to be more available and accessible to our customers, we are increasing our social media presence to get our products out there & online! We are new to the gram' so give us a like, comment & follow! @Emphatec #EmphaticallyUnique #EmphasisOnSolutions #EmphatecInc
Emphatec is pleased to announce that ITC Electrical components is now one of our distributors in Ontario.

ViewAllNewsBtn.gif

whitepaper downloads